Top 10 200W 120V Heating Element

0
552 reviews analysed

1. Twidec/ 8x100mm Cylinder Cartridge Heater 110V 200W Hot Rod Heating Element Replacement Electric Heating Pipe Fittings

Twidec/ 8x100mm Cylinder Cartridge Heater 110V 200W Hot Rod Heating Element Replacement Electric Heating Pipe Fittings

Feature

2. Outspark Replacement Hot Rod Ignitor Kit for Traeger Wood Pellet Grills, 200 Watt, 120 Volt, 3” High Density Heating Element

Outspark Replacement Hot Rod Ignitor Kit for Traeger Wood Pellet Grills, 200 Watt, 120 Volt, 3” High Density Heating Element

Feature

Description

KEEP YOUR GRILL GOING ALL YEAR LONG: 3″ high density cartridge heating element replacement. An identical match to the OEM hot stick. Compatible with all Traeger grills except for their PTG model. When your current hot rod shortens or burns out, this replacement part will ensure that your grill continues to operate effectively.

QUICK CONNECTING: 200 watt/120 volt, 24″ wire lead hot rod goes into the base of the firepot. Designed for a quick connection, once properly installed, reigniting your grill will be as simple as flipping a switch.

EASIEST WAY TO BBQ: A working hot rod does all the hard work for you — quickly lighting your wood and keeping the fire lit for quality grilling. Your grill simply won’t work without a functioning hot rod. Don’t settle for lighter fluid or propane torches that sacrifice the flavor quality of your grilled meats, smoked ribs, and other barbequed mainstays.

INSTALLATION TIP: Sometimes, the burnt out hot rod may be difficult to remove. Cutting off the end with a pair of diagonal pliers as swelling often occurs. Taping a wire onto the electrical connector before removal may also make the entire process go smoother. For best performance, only 1/8” to 1/4” of the wire should be visible once the replacement cartridge is in place.

3. Mor-Infrared FT-200-120-0-L6-WH-0 Ceramic Infrared Heating Element for Industrial Processing Applications – 120 Volt – 200 Watt – White Glaze – 9.65 Inches Long x 2.36 Inches Wide

Mor-Infrared FT-200-120-0-L6-WH-0 Ceramic Infrared Heating Element for Industrial Processing Applications - 120 Volt - 200 Watt - White Glaze - 9.65 Inches Long x 2.36 Inches Wide

Feature

Description

Recommended distance of 8″ (200mm) to material being heated.
Heating wire embedded into concave shaped heater creates infrared in focused rays.
12 month warranty against burnout. (Estimated life in excess of 10,000 operational hours.)
CE Approved.
Ceramic tubes over power lead wire within mounting tower increases the dielectric strength between the lead wire and mounting clip preventing a potential fault to ground.

Application usage is almost anywhere a non-contact heat source is needed in industrial process heating applications (heating, curing, cooking, and drying.)

Though ceramic, the elements are fairly rugged and are more durable than quartz, and cleaning is easy, with their splash-proof, non-corrosive, glazed finish, which also makes them the ideal choice for use in food handling, medical facilities, or other antiseptic applications. The large variety of sizes, shapes, and watt densities allows ceramic elements to be highly useful in zoning arrangements such as plastic thermoforming where complex heating patterns are needed.

For best results, the surface temperature of the Mor-Infrared ceramic infrared heater should be controlled using an open-loop (percentage timer) or a closed-loop (thermocouple feedback with digital temperature control) system. The infrared emission intensity is directly related to the surface temperature of the ceramic body.

Ceramic Heaters are mounted with the back side mounting post inserted through a pre-cut hole in a reflector. For best results the reflector should be highly reflective (polished aluminized steel) and capable of withstanding high temperatures.

4. DERNORD Immersion Cartridge Heater 120V 1500W Hot Rod Heating Element Replacement 3/4 Inch Thread

DERNORD Immersion Cartridge Heater 120V 1500W Hot Rod Heating Element Replacement 3/4 Inch Thread

Feature

Description

Size:120V 1500W

Product Features

1500W Cartridge Heater: Widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc

From the Manufacturer

The Dernord 120v 1500w Cartridge heaters are an extraordinarily versatile and durable product that is used to heat a myriad different processes from heavy industrial – plastics and packaging applications to critical care medical devices and analytical test instruments to being used on aircrafts, railcars and trucks. Cartridge heaters are capable of operating at temperatures of up to 1400F and achieving watt densities of up to 260 watts per square inch.

Application

1: Boiling water because of flange

2: Patient Comfort heating used in medical devices

3: Mold die and platen heating

4: Seal bars used in packaging equipment

5: Heating of hot stamps
Technical Details

Thread: 3/4 Inch

Tube length: 200mm

Wire length: 50cm

5. DERNORD Cartridge Heater 12V 100W Electric Hot Rod Stainless Steel Heating Element Replacement

DERNORD Cartridge Heater 12V 100W Electric Hot Rod Stainless Steel Heating Element Replacement

Feature

Description

Product Features

12v 100W Cartridge Heater widely used for 3D printer

From the Manufacturer

The Dernord 12v 100w Cartridge heaters are an extraordinarily versatile and durable product that is used to heat a myriad different processes from heavy industrial – plastics and packaging applications to critical care medical devices and analytical test instruments to being used on aircrafts, railcars and trucks. Cartridge heaters are capable of operating at temperatures of up to 1400F and achieving watt densities of up to 260 watts per square inch.

Application

1: Boiling water because of flange

2: Patient Comfort heating used in medical devices

3: Mold die and platen heating

4: Seal bars used in packaging equipment

5: Heating of hot stamps
Technical Details

Tube length: 100mm

Tube diameter: 8mm

Wire length: 32cm

6. Twidec/ 12x50mm Cylinder Cartridge Heater 110V 150W Hot Rod Heating Element Replacement Electric Heating Pipe Fittings

Twidec/ 12x50mm Cylinder Cartridge Heater 110V 150W Hot Rod Heating Element Replacement Electric Heating Pipe Fittings

Feature

Description

Size:12x50MM 150W

Specially designed for heating applications, such as injection molding machine, dies, hot plates, platens, etc. Provides high heat transfer, stainless steel heater is corrosion resistant.

7. soldbbq Hot Probe Rod Replacement for Traeger Wood Pellet Grills, Single, 200 Watt, 120 Volt, 24" Wire, 3” x ⅜” High Density Heating Element

soldbbq Hot Probe Rod Replacement for Traeger Wood Pellet Grills, Single, 200 Watt, 120 Volt, 24" Wire, 3” x ⅜” High Density Heating Element

Feature

Description

 Replacement Hot Rod, For your Traeger Grill
Compatible with All Traeger grills, such as Traeger 070, 075, Texas Elite Series, Pro Series, also fits for Pit Boss

8. BestTong 110V 250W 42x50mm Injected Mould Heating Element Brass Band Heater for Injection Molding Machine

BestTong 110V 250W 42x50mm Injected Mould Heating Element Brass Band Heater for Injection Molding Machine

Feature

Description

  • Brass copper structure, energy saving, quick heating, for Plastic Injection Machine.
  • Band heaters are designed to heat up cylindrical parts by conduction. The are used in many manufacturing processes such as the injection, extrusion and moulding processes
  • Or other specific applications such as tank heating and they are to be found in many industries such as the plastic processing industry, the car industry, chemical and food processing industries, etc
  • 9. Twidec/ 6x100mm Cylinder Cartridge Heater 110V 150W Hot Rod Heating Element Replacement Electric Heating Pipe Fittings

    Twidec/ 6x100mm Cylinder Cartridge Heater 110V 150W Hot Rod Heating Element Replacement Electric Heating Pipe Fittings

    Feature

    Description

    Specially designed for heating applications, such as injection molding machine, dies, hot plates, platens, etc. Provides high heat transfer, stainless steel heater is corrosion resistant.

    10. superbobi Hot Rod Igniter Fits All Traeger & Pit Boss Pellet Stoves 200 Watts Replacement PB-9.5110 120V 200W 600L

    superbobi Hot Rod Igniter Fits All Traeger & Pit Boss Pellet Stoves 200 Watts Replacement PB-9.5110 120V 200W 600L

    Feature

    Description

    Description:
    For Pit Boss Wood Pellet Grills.
    When your current hot rod shortens or burns out, this replacement part will ensure that your grill continues to operate effectively.

    Features:
    >Upgraded Replacement Hot Rod Ignitor Kit,
    >Maintains more consistent temperatures
    >Design improved for more durability, Stable and updated characteristics, high reliability.
    >Plug and Play Simple Installation.

    Specifications:
    >Item: Hot Rod Ignitor Kit
    >200 Watt /120 volt
    >4 1/4″ (4.33″) high density cartridge heating element
    >24″ (23.62″) heat woven wire lead

    Compatibility:
    >For all Pit Boss Wood Pellet Grills
    >Installation Tips: For proper installation, only 1/8-1/4 inch should be showing in firepot

    Package Included:
    >1Pc x Hot Rod Ignitor Kit.

    Conclusion

    By our suggestions above, we hope that you can found 200W 120V Heating Element for you.Please don’t forget to share your experience by comment in this post. Thank you!

    Home Previews
    Logo
    Enable registration in settings - general