Top 10 Anti Corrosion Water Cooling

Primochill System Reboot was created to address the need to prepare/clean existing cooling loops AND be able to clean out old dyes that may have leached onto components during previous usage. Similar to Sysprep this flush style solution will cleanse out any debris/residue leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. The beauty of ReBoot is it’s ability to pull color from stained components.

Specifications

Compatibility: ReBoot is compatible with rigid and flexible tubing of all sizes.  It is safe to use on rubber, plastics and acrylics

Included Parts: 1x 15ml Bottle of ReBoot (makes 1 gallon of coolant)

Instructions
1.Double-check connections to ensure loop is “closed”. No Leaks!
2.Empty bottle of ReBoot into 1 US Gallon of fresh DI or Distilled water, shake for 30 seconds
3.Fill loop with treated solution and be sure to remove as many air bubbles as possible.
4.Start pump and begin circulating the treated solution.
5.Run solution for at least 24 to 48 hours to ensure loop is properly flushed and treated. ReBoot is not an effective final coolant and should be replaced with coolant before any extended use of computer.
6.Drain System. Inspect drained solution for debris or foreign particles. Repeat flush if needed.
7.Fill system with fresh DI or distilled water and flush thoroughly to remove ReBoot solution checking for foam.
8.Drain system.**.
9.Fill loop with your choice of coolant and begin water-cooling.
** Reboot needs to be flushed from the system until no foam is seen and water runs clear

Warnings

Are you constantly trying to deburr your rigid tube by hand? Stop hand cranking that cheap plastic reamer! The PrimoChill RFB (Rigid Finishing Bit) is a standard size drill bit with the power to save you time and energy while giving a perfectly finished tubing end. The RFB can be used at mid to low RPM to smooth out the end of your tube with no effort. Crank up the RPMs and you can customize the length of the tube as well. This functionality allows you to rough cut your rigid tube and then fine tune it to the perfect length with clean ends. Custom fitting your rigid tube is now so much easier!
Specifications:
Tube Compatibility: 12mm x 16mm rigid tubing
Material Compatibility:PETG, PMMA (Due to extremely quick dulling of the bit, Copper tubing is not recommended.)

XSPC Antimicrobial Silver Coils help to inhibit bacterial growth and algae when added to your watercooling loop. XSPC Silver Coil are made in the UK from 99.999% pure silver.

• Ribbon Dimensions: 75 x 3 x 0.5 mm
• Coiled Dimensions: 20 x 10mm
• Surface Area: 500mm square
• Weight: 1.3g
• Material: 0.999 Fine Silver

Model: 5060596650626

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

The PrimoChill Rad Clean – Radiator Cleaning Treatment is a solution for cleaning radiators outside of a loop. By using this cleaner you can “”scrub”” the inside of your rad without fear of damaging other components, seals or acrylic! This solution is easy to mix, easy to use, and gets you ready to go!
Specifications

Compatibility
Rad Clean is compatible with the internal metals found in radiators only! Using Rad Clean on nickel items is NOT compatible!
Instructions
For this pre-treatment to work correctly follow the instructions below. 
Step 1: Dilute one half bottle of RadClean into 32oz of distilled/Ro/Di water.
Step 2: Fill radiator up with Radclean mixture
Step 3:Close both ports with plastic fillports. Ensure they’re plastic. Shake radiator.
Step 4:Let your radiator sit for one hour.
Step 5:Drain radiator and flush radiator extensively with distilled/ro/di water
Step 6:Drain radiator and let dry completely.
Warnings
Important to use plastic fittings when cleaning radiators while using Rad Clean! PrimoChill is not responsible for any hardware damage. Use at your own risk.

Create perfect cuts on up to 25mm tubing with the PrimoChill Universal Tube Cutter. It comes with a wide cutting base to support tubing while cutting. The result is an even cut that allows a perfect seal to the base of your fittings. The quality surpasses any other cutter on the market with a full metal body that allows a stable feel when gripped. The stability ensures the frame doesn’t twist making these a safe solution for all your cutting needs.

Specifications

Included Parts

Warnings:PrimoChill is not responsible for any hardware damage. Use at your own risk.

The Hydro Series H60 is an all in one liquid CPU cooler with a 120mm radiator built for low noise liquid CPU cooling and bold styling with a white LED lit pump head. Compatible with all current AM4, LGA 1151 and LGA 2066 socket CPUs and equipped with a CORSAIR 120mm SP Series PWM fan, users can adjust the fan speed between 600 RPM to 1,700 RPM for precise control over noise and airflow. A high density 120mm slim radiator provides greater surface area for superb heat dissipation, while a thermally optimized copper cold plate and low noise pump ensure heat is quietly and efficiently channeled away from your CPU. With tool free easy installation and CORSAIR engineered cooling, the H60 is everything you need to keep your CPU running fast, cool and quiet.

PrimoFlex Advanced LRT Tubing has been designed, formulated, and manufactured for today’s evolving standards in the PC water cooling industry. Advanced LRT has been carefully formulated to perform in a wide range of closed loop cooling systems, creating the most compatible water cooling tubing ever created.
SysPrep & Liquid Utopia INCLUDED
Included in the package at no additional cost is a 15mL bottle of SysPrep – Cooling Loop Pre-Treatment as well as a 15mL bottle of Liquid Utopia. Any successful venture into water-cooling starts with a true cooling loop preparation which can only be achieved by using Sys Prep. It will “flush” your loop and its components of any debris left by the manufacturing processes of your reservoir, block, pump, or radiator, leaving your water cooling loop clean, clear, pristine and ready for any type of coolant. Once your LRT tubing is crystal clear the Liquid Utopia offers a full line of protection against algae and corrosion.
Warnings/Cautions: With the use of different components, materials, fluids, and flow rates, results may vary with the appearance of your tubing. Advanced LRT is designed to work with a large variety of cooling components, however the use of alcohols, Ethylene Glycol and as well as any other harmful chemicals is strictly prohibited and will void your warranty.Tubing will stain if dyed coolants are used. PrimoChill is not responsible for any damage caused by or when using this product. Please use at your own risk.

The MasterLiquid all-in-one liquid CPU cooler is custom, inside and out. Our low-profile dual chamber pump outperforms its single chamber predecessors in heat transfer. The MasterFan Air Balance fans work with our characteristically sturdy build quality to keep this thing as quiet as a library. Kink-free, factory-sealed FEP tubing now comes sleeved for a premium look. Screw it in and experience the quiet muscle of liquid cooling without ever worrying about refills or maintenance. Enjoy the work of decades of thermal innovation.

The Enhanced D5 Liquid Cooling 12V Pump Motor is packed with a new PWM control chip. With this new controller the D5 now has a duty-cycle, feedback, and PWM control that scales in a similar way as the DDC 3.25. This makes it a very reliable and smooth operating pump. This PWM control allows you to automate the pump speed based on CPU temperature using the motherboard PWM CPU fan header. This functionality keeps your pump only running at speeds that are needed. This also allows the safety feature of auto shut down based on RPM feedback if available in your BIOS.
Warnings/Cautions:
Use of caustic and/or abrasive coolant will void your warranty and may cause your pump to fail. Running D5 pumps dry (without fluid) immediately voids the warranty. Replacements / RMAs will not be given under these conditions.
PrimoChill is not responsible for any hardware damage. Use at your own risk. This pump comes stock without any housing allowing you to integrate any of your favorite pump tops and pump accessories. Due to this the pump cannot be used as a standalone unit.
Nominal voltage:12 V DC
Operating voltage range:8 to 24 VDC
Nominal power (@ 12 V):37 W
Max Nominal current (@ 12 V):2 amps
Motor type:Brushless, microprocessor controlled Maximum head:12.79 ft (3.9 m)
Maximum discharge:~ 396 GPH (1500 LPH)
Maximum system temperature: 140°F (60°C)
Performance will vary based on housing used