The Best Bench Top Vacuum

Product Description

A 3-piece wet dry vacuum adapter kit that includes a 2-1/-inch to 1-7/8-inch adapter, 1-7/8-inch to 1-1/4-inch adapter and 2-1/2-inch hose to hose connector. As a universal shop vacuum adapter it works with most wet dry vacuums including WORKSHOP Wet/Dry Vacs.

From the Manufacturer

Includes 2-1/2″ to 1-7/8″ Adapter, 1-7/8″ to 1-1/4″ Adapter and 2-1/2″ Hose to Hose Connector. This kit affords additional versatility to your vac.

Product Description

This powerful floor vacuum has a strong 2-stage industrial motor making it quieter, last longer and provide greater suction. It’s easy to use, lightweight and portable with great features like automatic cord rewind, triple filtration, onboard accessory storage and a large dust-sealed on/off switch.

From the Manufacturer

This powerful wet/dry floor vacuum is powered by a strong 2-stage industrial motor making the unit quiet, last longer and provide great suction. The unit is easy to use as it is lightweight, portable and has great features like automatic cord rewind and triple filtration. Features: powerful and quiet 2-stage motor, 5 peak HP motor, 72 DB quit operation, 71-Inch sealed water lift, 4 gallon polypropylene tank, on-board accessory storage, 18-Foot cord with automatic cord rewind, 7-Foot x 1 1/4-inch hose, secure fit hose, large on/off dust sealed switch, cartridge filter, dust bag, HEPA filter, foam sleeve, rear caddy for accessory storage, large rear wheels for easy mobility, double insulated motor. Accessories: 3 extension wands, crevice tool, 2-in 1 utility nozzle, floor nozzle, dust brush

Stepping up in power and drum capacity, the 9 gallon wet dry vacuum cleaner remains easy to maneuver with a large carry handle 360 degree swivel caster. Includes: shop vacuum cleaner, 7-foot locking hose, WS21200F standard Qwik Lock vac filter, WS32090F dust collection bag, utility nozzle, wet nozzle, car nozzle, two locking extension wands, owner’s manual. Also compatible with WS22200F Fine Dust Filter and WS23200F HEPA Media Cartridge Filters, and for wet pick-up, the WS24200F Wet Filter.

The Makita 18V compact Lithium-Ion cordless vacuum kit, model XLC02R1B, is a compact and powerful cordless vacuum with strong suction for fast and efficient cleaning. At only 18-3/4” in length this compact vacuum can be used as a “hand-vac”, or with the floor nozzle extension for floors, carpets, and hard-to-reach spaces. The XLC02R1B is a kit and includes the fast-charging 18V compact Lithium-Ion battery and efficient Rapid optimum charger. It’S part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star protection Computer controls. Star protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT and compact Lithium-Ion batteries with the Star symbol on the battery indicating Star protection inside.

The Stanley Hang Up series is designed specifically for your garage, workshops, or laundry rooms. High performance motor provides maximum power. Easy removal from wall bracket for emptying or portable use. Tool holder for entire accessories. Top handle for easy handling. Space saving, easy to install wall mount. Extra long hoses provide wide cleaning area. Powerful blower port instantly converts vacuumuum to power blower. Accessories include 1-1 or 4-Inch by 20-Feet flexible hose, two extension wands, crevice nozzle, utility nozzle, floor brush, wall mount, tool holder, reusable dry filter, foam filter, disposable filter bag. Stanley wet or dry vacuumuums provide superior performance in any environment. From a portable wall-mounted 1-Gallon, 1.5 Peak HP vacuum great for a variety of clean-up tasks any room at home and the garage to the rugged 16-Gallon, 6.5 Peak HP Stainless Steel vacuum for heavy-duty use, Stanley vacuums make short work of even the toughest jobs, saving you time and effort. vacuum-the number one name in vacuum industry.

The DEWALT 18/20V MAX Cordless Wet-Dry Vacuum is designed for cordless operation powered by either an 18v or 20v MAX battery. This unit features an easily accessible, washable/reusable filter; just simply use tap or water rinse to clean. A heavy-duty, crush-resistant, fully-integrated 5′ (by 1-1/4″ diameter) hose provides durability, flexibility and ease-of-use and the on-board hose and accessory storage makes the vacuum easy to carry/transport to use where ever you made need it. It also features a 2-Gallon tank capacity that provides enough storage to empty a toilet or clogged pipe. Common applications include: Wet or Dry Pickup and/or Blowing. Includes: (1) 5′ Heavy-Duty Crush Resistant Hose (1-1/4″ Diameter), (1) Crevice Tool Attachment, (1) Wide Nozzle Tool Attachment and (1) Filter. Battery & Charger Sold Separately.

Specification:
Condition: 100% Brand New
Color: As pictures show

Voltage: 110V

Optional Plug: US Plug

Package list:

1 * Sand Blasting Machine

(1) Blasting machine failure phenomenon: no compressed air, no abrasive
Possible reasons: 1. Compressed air is not open
2. The pressure regulating valve is too low
3. The foot switch is not adjusted or damaged
4. Sandblasting or abrasive valve blockage
5. The safety air passage is cut off
6. The main pressure regulating valve of the sand blasting machine is broken.
7. The control pressure regulating valve is broken.
Remedy: 1. Open the air source
2. Adjust the pressure to 0.5MPa or more
3. Adjust or replace the foot switch
4. Clean the nozzle or abrasive valve or reload
5. Check the valve on the safety air line
6. Check the main regulator of the blasting machine
7. Check the blasting machine control valve
(2) Blowing machine failure phenomenon: good sand material enters the dust bag
Possible reasons: 1. The new vacuum bag has a large gap.
2. The sand is too fine
Remedy: 1. It can be removed after 8 hours of general use.
2. Use coarser sand
(3) Failure phenomenon of sand blasting machine: loss of sand material
Possible cause: The vacuum bag has holes or is not clamped
Remedy: Replace the vacuum bag and re-clamp the vacuum bag
(4) Blowing machine failure phenomenon: the line of sight is unclear when sandblasting
Possible reasons: 1. Vacuum bag is blocked
2. Vacuum bag aging blocked
3. There is too much dust in the sand
4. Compressed air pressure is too high
Remedy: 1. Rapping sand blasting machine vacuum bag
2. Replace the blasting machine vacuum bag
3. Replace the sand
4. Press the recommended pressure of the sand blasting machine to lower

Product Description

This item is DEWALT DW734 15 Amp 12-1/2-Inch Benchtop Planer . Used for Woodworking, Planers-Benchtop. The produt is manufactured in Taiwan.

Amazon.com

The DEWALT DW734 12-1/2-Inch Thickness Planer features a three-knife cutterhead and a powerful, 15 amp motor that delivers 10,000 rpm. Also offering quick, accurate depth adjustment, extra-long feed tables for material support, and the convenience of knives that are reversible and disposable, this planer makes it easy to create clean, custom stock.

12-1/2-Inch Thickness Planer with Three Knife Cutterhead At a Glance: Powerful 15 amp motor Three-knife cutterhead operates at 10,000 rpm 96 cuts per inch for a fine finish Disposable, reversible steel knives are easy to change 1/8-inch maximum cut depth; 6-inch depth capacity; 12-1/2-inch width capacity Three-year limited warranty, one-year free service, 90-day money-back guarantee

Create custom stock with the thickness planer’s 10,000 rpm three-knife cutterhead. View larger.

Versatile planer cuts a wide range of hardwoods. View larger.

Powerful 15 Amp Motor for Deep, Clean Cuts
Benchtop planers are a long-term investment that allow you to buy rough stock and dimension it yourself. They also make creating custom materials easier, which, makes getting great results easier.

This planer’s powerful 15 amp motor handles a wide range of tough hardwoods, and its three-knife cutterhead spins at 10,000 RPM to provide 96 cuts per inch.

Reversible, Disposable Knives for Convenience
The DEWALT DW734 uses razor sharp knives that are reversible and disposable. These knives last 30 percent longer than traditional disposable knives, helping you avoid costly and time-consuming resharpening.

For fast, easy, one-tool knife changes, a set of pins machined on the cutter-head goes through holes machined on the knife. This helps you quickly locate the fresh knife and refasten the knife clamp.

Effective Dust and Debris Management
The DW734 planer includes a dust hood that attaches to a shop vacuum or standing dust collector (sold separately) for efficient collection of chips and debris.

Large Capacity and Easy, Accurate Depth Adjustment
This planer’s extra-long infeed and outfeed tables provide 33-1/2 inches of material support. A turret depth stop saves you time when setting the machine at commonly used depths.

In addition, the planer’s material-removal gauge and extra-large thickness scale help ensure every pass is accurate. A four-column carriage lock drastically reduces the movement that causes material damage, or snipe, when planning near the end of a board.

This sturdy planer weighs 80 pounds. It offers a maximum cut depth of 1/8 inch, a depth capacity of 6 inches, and a width capacity of 12-1/2 inches.

This DW734 12-1/2-Inch Thickness Planer with Three Knife Cutterhead comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What’s in the Box
DW734 DEWALT 12-1/2-Inch Thickness Planer with Three-Knife Cutterhead and dust hood.

The DEWALT DW734 features extra-long feed tables for material support.