603 reviews analysed
1. LDK Mini Heat Gun, Electric Phone Repair Tool Compact Hot Air Gun for DIY Shrink Wrap Drying Paint Embossing 110V 300W
- ★ Hot air shrink gun was made of high quality stainless steel and ABS plastic, mini dimensions 225*47mm / 8.86*1.85in.
- ★ Handing part adopts salient point nonskid designs that cause safe hand holding with small energizing.
- ★ Voltage&Cooling Holes: Voltage 110V, the temp of the nozzle could reach to 200° in seconds. The heat vents of heat gun tail can decreased the internal high temp and extend the life.
- ★ Suitable for: This excellent compact heat gun can be used for heating shrinkable film, embossed powder, rubber stamp. Built-in stand for self-support and table top use.
- ★ Warm Tips: The temp of the nozzle could reach to 200° in seconds, please don’t use it more than 10 minutes in one time. [12 Month Warranty] [100% Money Back Guarantee] If you’re not happy for any reason, simply contact us and we’ll give you a full refund and no need to return the product.
Type: Constant temperature
Working Temperature: It can reach at about 200°C / 390°F within a few seconds
Rated Power: 300W
Power Type: AC power supply
Rated Voltage: 110V
Plug Type: US plug
Power Cable Length: 95cm/37 inch
1 * Hot Air Gun
1 * User Manual
1. This kind of heat gun can not adjust the temperature but it heats up quickly at about 200°C theoretically.
2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
3. Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed.
4. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
5. Caution with child ! ! ! Please minor children in the safe use of hot air gun under the guidance of an adult to accompany!
6. Do not use it continuously for more than 10 minutes to avoid overheating the machine!
7. Do not touch the hot nozzle when using or just after use.
2. SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit Variable Temperature Control with 2-Temp Settings 4 Nozzles 122℉~1202℉（50℃- 650℃）with Overload Protection for Crafts, Shrinking PVC, Stripping Paint
- ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min
- II: 50-650℃, 250-500L/min
- ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉
- Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
- ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders
- Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
- ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface
- Two concentrator nozzles direct a concentrated heat flow to the work surface
- Reflector nozzle disperses heat flow evenly around the whole work surface
- ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
3. Heat Gun, PRULDE HG0080 Dual Temperature Hot Air Gun Kit with 4 Nozzle Attachments for Crafts, Shrink Wrapping, Shrink Tubing, Paint Removing
- ????Fathers day gifts ➤Working Time Over 600 hours in max temperature.
- ????Friendly after-sale service — We provide replacement service instead of repairing.
- ????EASY TO USE– Lightweight and compact heat guns is only 1.3 LB .Integrated hands free support stand allows heat gun sit upright for easy use.
- ???? SAFE & DURABLE– Hot air gun built-in overheating protection ensures safe and reliable use. Equipped with a flexible tube and special handle design to prevent damage and reduce fatigue during use.
- ???? WIDE APPLICATION– This heat gun with 4 nozzles attachment ideal for bending pipes, lighting Charcoal, shrinking PVC, removing rusted bolts, softening caulk around the sink or even bending and moulding plastics as well as drying and thawing purpose.
- ???? DUAL TEMPERATURE CONTROL– Find the perfect heat setting for your project needs by switching between the two temperature settings. The heat blower gun offers a low 752°F and high 1112°F setting.
- ???? FRIENDLY CUSTOMER SERVICE– Full quick refund or new replacement service. We always be here for after-sale customer service.
【CAUTION】 When used for the first time, it will emit white smoke in a short time after starting up, which is a normal phenomenon.
☞What are you waiting for? Order Now!
☆ Lightweight & Compact
☆ Dual Temperature
☆ Ventilation Design & Comfortable Hand Design
☆ Heat-Resistant Shell
☆ Flexible Tube
☆ Standable and Hands-Free Design
What can this hot air gun do for you?
✓ Removing paint [High]
✓ Removing adhesive backed floor coverings [Low]
✓ Drying paint or plaster [Low]
✓ Heating shrink tube [Low]
✓ Heating shrink wrap [Low]
✓ Thawing frozen locks [Low]
✓ Thawing frozen pipe [High]
✓ Loosening seized bolts [High]
✓ Bending plastic [Low]
✓ Waxing skis & snowboards [Low]
※ Rated Voltage/Frequency: 120V/60HZ
※ Output: 1200 Watts
※ Temperature & Air Flow: I : 752°F 250L/M II : 1112°F 500L/M
※ Net Weight: 1.3 LB
※ Cord Length: 6.6ft (longer than common heat gun)
What Will You Get?
– 1 x Powerful Heat Gun
– 4 x Nozzle Attachment
– 1 x Guide Instruction
With more than 20 year’s development experience,
we are specialized in design and manufacturing various electric tools.
Our R&D team regularly develop new items every year to keep up with the market trends and to meet customers’ requirement.
All of our products have safety approvals such as GS/TUV, CE, UL certification or ISO9001.
4. Tacklife HGP72AC 1700W Heavy Duty Heat Gun HT 1202℉ with Large LCD Display, Variable Temperature Adjustable Wind Speed and Memory Settings and Four Nozzles
- ▲ULTRA STURDY: Working Time Over 600 hours in max temperature(data from lab)
- ADJUSTABLE TEMPERATURE & MEMORY SETTINGS – Build- in Ceramic Core, two modes switch with variable temperature by digital control [ I: 122℉(50℃)-250-500L/min II: 122℉-1202℉(50-650℃) -250-500L/min that can adjust the temperature quickly with long press
- 4 memory settings let you switch quickly between 4 customize temperature/fan settings
- COOLING MODE & OVER HEATING PROTECTION – Unique cooling mode design, which can quickly cool down the material in high temperature after heat up
- Designed with dual heating wire for rapid heating, the integrated overload protection function can block the heating element and prevent burning
- advanced high temp resistant heat gun head makes heat gun safer
- LCD DISPLAY & STRONG POWER – Digital Control with Large LCD Display, can clearly see the use of temperature
- With 1700w power provides quickly heat up to the maximum temperature 1202℉(650℃) in seconds. Professional heater gives outstanding performance by keeping running 500 -600 hours in max temperature(data from lab)
- WIDE APPLICATION – Equipped with Four heat gun nozzles & Scraper & three scraper Blade & putty knife, which can can be used for stripping paint, bending pipes, lighting charcoal, shrinking PVC, removing rusted bolts, softening caulk around the sink or even bending and molding plastics as well as drying and thawing purpose, 2M wire length supports a wider range of use
- WHAT YOU GET – Tacklife HGP72AC Heat Gun with 1.8 m cord, Spoon reflector nozzle,Cone nozzle,Fish tail surface nozzle , BBQ lighter Nozzle, Scraper, three scraper blades, putty knife,User Manual,warranty card, 24 months warranty
5. Mini Heat Gun, TACKLIFE 350W 662°F Handheld Hot Air Gun, 6.56Ft Ultra Long Cable for DIY Craft Embossing, Shrink Wrapping and Drying Paint- HGP35AC
- ❤ Please feel free to contact us if you have any problem!❤
- ????High Power and Quickly Heat Up: With max power 350W, it can reach at about 350°C/662°F easily within a few seconds which can make the work more quicker and more efficient
- With Nickel-chromium heating wire structure&mica bracket, it can speed up heat dissipation and extend the service life
- ????Compact Design and Extra Accessories: Simple and lightweight design with stainless steel tuyere, PC& PA6+30GF outside, which makes it more durable.Easy to use with non-slip soft glue
- With an extra spoon reflector, it will be more convient for heating shrinkable tube
- ????Wide Application and Esscential for DIY: Wide use and perfect for DIY projects. It can be used to burn powder,remove old painting,heat to shrink film, defrost and remove mud and dirt etc.If you like DIY, it can be used for making handmade candle,rubber stamp and so on
- ????Long Cable and Extensive Handcrafting:With 6.56Ft (2M) extended cable, longer more than any other mini heat guns, it is easier for you to handle wider, you can do what you want with it
- ????Package Included and After-sale service:Tacklife HGP35AC MINI Heat Gun
- A spoon reflector
- User Manual
- A Card
- We promise that customers can enjoy our worry-free customer service
6. ChgImposs Mini Hot Air Gun, 110V 300W Portable Multi Function Electrical Heat Tool for DIY Embossing, Shrink Wrapping, Drying Paint
- Easy to use, just keep about 5-6cm distance from your DIY craft and heat it at about a 45 degree angle so that avoiding hurt by it
- Made of high-quality ABS plastic outside and stainless steel inside, heat resistance, low temperature resistance, simple and durable
- The length of wire is about 1M / 3Ft, you can do it what you want. Dimension: 225 x 25mm / 8.86 x 0.98″
- The temprature can not adjustable, in theory, it can reach at 200°C/392°F within a few seconds, which heat up quickly and works like a charm
- It works great for crafts, DIY and stripping paint，electronics, beading, or melting items, ceramic creations，rubber stamp, embossed powder, heating shrinkable film, heat shrink tubing, embossing, shrink wrapping packages,etc
– 100% stainless steel bearing twist
– Power cord, metal energy saving
– Safety switch port,electric shock
– Professional vents design, long life
– Rated temperature greater than 200 degrees
– DIY Supplies: Woodworking,embossed powder and the thermal film etc
Output Power: 300W
Line Length: Approx 1 M
Power Supply Type: AC power supply
Product Weight: 225 G / 7.94 Ounces
Product Dimensions (L*W*H) : 225*50*50 MM / 8.86*1.97*1.97 Inches
1 x Hot air gun
1 x Manual
7. Heat Gun Dual Temperature Settings, NEU MASTER N2190 1500W Hot Air Gun 800°F – 1112°F, Overload Protection with 4 Nozzle Attachments for Shrink Wrapping/Tubing, Paint Removal
- ▶DUAL TEMPERATURE – 2 Temperature settings 800℉ & 1112℉ and 2 Air flow speed control [II: 500 L/min, I: 300 L/min] can satisfy all your requirements.
- ▶STRONG POWER – Craft heat gun with 1500W heats up to maximum temperature 1112℉ quickly
- Professional DC copper motor can guarantee more stable operation.
- ▶CONVENIENCE USE – The 6.5Ft power cord with UL plug supports a wider range of use, very convenient for you to move freely in large work area. In addition, The Back support gives it stability when you’re putting it down on its back so it can be used hands free.
- ▶SAFETY – Professional built-in overload protection prevents electric heat gun from over-heat due to misuse and extends service life.
- ▶VERSATILE ACCESSORIES – 4 Nozzle attachments meet different application needs. Great for shrink wrapping, epoxy resin, shrink tubing, crafts, cell phone repairs, vinyl wrap, paint removal, electronics repair, etc.
8. 110V 300W Mini Portable Heat Gun for Heat Shrink Tubings and Drying Paint Hand-Hold Hot Air Gun
- 【MATERIAL】The mini heat gun is made of high-quality ABS plastic exterior and stainless steel inside, portable, simple and durable.
- 【DIMENSION】 Product dimension: 9-in x 1.7-in. The wire length of the heat shrink gun is 39-in. Built in a heat sink makes the internal temperature of the hot air gun is reduced and life is prolonged.
- 【FUNCTION】The portable hot air gun heats up in seconds and quickly gets hot temperature up to 200°C/390°F. Please DO NOT make it work more than 8 minutes in one time, also please DO NOT get too close to the material.
- 【APPLICATION】NEX heat shrink gun Comes with an additional replaceable protecting cap, it’s great for rubber stamp, embossed powder, heat shrinkable film, heat shrink tubings and drying paint, etc.
- 【ATTENTION PLEASE】All of the NEX Mini Hot air Gun are sold only by “toppowersellerus”, in order to offer all the customer’s a pleasant shopping experience, we will take responsibility to all our customer purchased from us. If you received the item without the NEX logo on the box, you will have an opportunity to get a DOUBLE REFUND. Please DO NOT trust any counterfeit seller. Thanks for your support!
NEX is our legal trademark in US.
We always focus on looking for items of elaborately designed and affordable price for customer. If there is any problem with your purchase, please contact our customer service directly. We will reply you in 12 hours and give you a reasonable solution.
Color: White(body) + Blue(protecting cap)
Size: 9*1.7-in, wire length: 39-in
Type: Constant temperature
Working temperature: 200℃
Rated power: 300W
Power type: AC power supply
Working Time: 8 minutes
1. Plug in the heat tool.
2. Hold the gun but do not touch the hot nozzle.
3. Keep a distance of 3-5cm from the vent,heating at an angle of about 45 degrees until the completion of the work.
4. Turn off the power to stay cooling.
1. This kind of gun can not adjust the temperature but it heats up quickly at about 200℃ theoretically. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.
2. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.
3. 100% satisfaction guarantee, 100% worry-free guarantee, 1-year manufacture guarantee! 30-day return & money back guarantee, we offer premium quality and the best service, no matter what reason cause dissatisfaction, we’ll replace it or reimburse you every cent back!
1 x Heat Gun
1 x Instruction
2 x Protecting Cap
9. Wagner Spraytech Wagner 0503038 HT400 Heat Gun 650ᵒF Basic pack
- DURABLE HEAT GUN: The HT400 precision heat tool is a versatile tool for home, shop and hobby projects and has a 650°F (343°C) temperature setting
- MANY APPLICATIONS: This versatile heat gun tool can be used for electrical repair, embossing, stripping paint, bending plastic pipe, shrink wrapping and tubing, and more
- PRECISE CONTROL: Small size makes this an ideal heating tool for getting into hard-to-reach places and concentrating high heat on small areas
- COMPACT DESIGN: Pencil-like design and 360 watts of power makes this heat tool great for delicate projects. The power tool fits comfortably in the user’s hand and weighs only a pound
- HANDS FREE FEATURE: Use the installed, retractable stand for hands free operation to easily complete all of your household heating and electrical projects
The HT400 Precision Heat Tool is a versatile tool for home,shop and hobby projects. Its small size is ideal for getting into hard to reach places and working on delicate projects related to crafting and electronics. Its simple design has one temperature setting of 650ºF and an integrated stand for hands-free work.
From the Manufacturer
The HT400 Heat Gun gives outstanding performance in a small package. The heat gun is ideal for crafts and hobbies. Use it to apply embossing powders, applique and shrink wrap. Remelt adhesives and form plastic material. It is also great for applying electrical shrink wrap.
10. mofa emboss Heat Pen,Mini Heat Gun,Hot Air Pen Tools Shrink Pen with Stand For DIY Embossing And Drying Paint Multi-Purpose Electric Heating Nozzle 130W 110V (Pink,White)
- Heating tools,can be used in soft clay.Built-in stand for self-support and table top use
- Easy to use.DIY hand tools,production of heat shrinkable sheet,soft pottery stereotypes.
- General purpose heat pen for crafts.Heat pen size is smaller than the heat gun, the function is the same, and the work is finer.
- At heat pen tail, the heat vents designed in both sides to reduce the internal temperature and extend the product duration.
- Mini Heat pen great for heat shrink tubing, embossing, drying paint, paper, fabrics, craft foams, glue, ink, DIY, firm shape, clay
Mini 130 watt heat gun. Fast and easy to use for multi-function DIY works.
Comfortable and lightweight heat gun, ideal for heat shrink tubing, embossing and drying a variety of paints, glues, and inks.
Built-in stand for self-support and table top use.
Material: ABS Plastic
Length: approx. 19cm
Power Cable: approx. 1m
Working temp.: 200 ℃
Voltage: 110V 50-60HZ
Weight: approx. 204g
Plug Type: US Plug
By our suggestions above, we hope that you can found Heating Gun For Phone for you.Please don’t forget to share your experience by comment in this post. Thank you!