Top 10 Kenmore Elite Dishwasher Insulation Pad

These premium W10195416 Lower Dishwasher Wheels are used in a dishwasher to easily roll the rack back and forth on the rails. To repair, open the dishwasher door and pull out the lower dish rack. Next, push the tab from both sides and it should pop out. To install the new wheel assembly, place it on the rack and make sure the caps overlap the wire from the inside before you clip it in place by pushing the wheel. Slide the rack back in the washer to make sure it is installed correctly.

Replacement for part numbers W10195416, W10195416V, AP5983730 and PS11722152

Choose these premium dishwasher wheels for a hassle free fix for your dishwasher!

5.Easily install these under-counter dishwasher mounting brackets and keep the dishwasher from moving around in your cabinets. Add these to your cart right now and order yours today!

Description:

What size are they? : about 3.1 inches long and just about 1 inch wide
This package includes 2 galvanized steel dishwasher mounting brackets (will never rust) in a convenient plastic storage pouch.
The brackets are manufactured in a high-quality metal fabrication facility

Installation instructions:

1. Don’t get shocked, unplug your dishwasher before starting the project
2. Remove sound dampening pad. Check to see if there is enough slack from your water lines and power chords to pull the dishwasher out about a foot. If not, please turn off water line and release your power chord from where its plugged in.
3. Open the dishwasher and discard any existing brackets (if there are any)
4. With the door open, gently pull the dishwasher about 6-12 inches from your cabinetry
5. If old brackets are in place, use a pair of pliers to remove them
6. Remove new dishwasher mounting brackets from the pouch and insert into the same slots as previous brackets.
7. Once brackets are installed, using the same pliers to bend the back of the bracket to ensure that the bracket cannot release itself from the slow.
8. Once both brackets are installed, gently slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary).
9. Install 2, ½ inch screws through one of the three screw holes to secure the dishwasher in place.

You’re done! Congrats.

Lifetime warranty: Love it or we’ll buy them back from you, no questions asked.

Part Number WD01X10262 replaces 1088414, AH958842, EA958842, PS958842, WD01X10002, WD01X10003, WD01X10085, WD01X1328, WD01X1465, WD01X1498, WD01X1499, WD1X10002, WD1X10003, WD1X10085, WD1X1328, WD1X1465, WD1X1498, WD1X1499.

GE Factory Part. GE brands include General Electric, Hotpoint, RCA, and others. GE also makes various appliance models for Sears / Kenmore.

The Thermo-Tec Adhesive Backed Heat Barrier protects parts and components from radiant heat. It can be used in applications to protect painted surfaces, plastic parts or any component from the damaging effects of radiant heat. Adhesive Backed Heat Barrier is made up of woven silica with a flexible aluminized finish. The highly reflective surface of the material is capable of withstanding radiant temperatures up to 2000 degrees Fahrenheit. The adhesive backed side handles direct and continuous temperatures up to 300 degrees Fahrenheit. The adhesive backed composite construction material can easily be applied to any surface or wrapped around a hose or wire to make a clean professional appearance.

The Suppressor is ideal when both sound and radiant heat control is needed.

Package Includes: Neoprene Sponge Foam Sheet x6.

► Non-Absorbent, resistance to most oils, solvents, and fuels.
►You can cut the sizes and shapes freely.

Tips
►DEALIKEE aims to offer customers the best product and service, please email us freely if you have any problem.