903 reviews analysed
1. Quadrafire Pellet Stove Ignitor SRV7000-462, 812-3811
Specifications:Fits all Quadrafire models with Cast Iron Burn Pot.Castile, Contour, CB1200, Santa Fe, Mt Vernon Original, AE, 800, 1000 and 1100 that have been upgraded to a Cast Iron burn pot.This is the Newest Igniter available and has been redesigned to last longer than the original.
2. Quadrafire Pellet Stove Ignitor, Igniter LOOP 8123811-2 pack
Fits all Quadrafire models with Cast Iron Burn Pot. Castile, Contour, CB1200, Santa Fe, Mt Vernon Original, AE, 800, 1000 and 1100 with new style cast iron burn pots. Wiring – Your new igniter may have a electrical plug that is different from you old igniter. Cut the old plug off and splice the wires to the old wiring using your choice of electrical connector. It doesn’t matter which wire goes to which as long as they are connected.
3. Quadrafire Pellet Stove Ignitor 7000-462!!
QUADRA FIRE MULTI-FUEL LOOP IGNITER ELEMENT 380 WATT Fits Models: ~ Mt. Vernon A.E. (Advanced Energy) ~ Edge 60 Insert *If you burn a mixture of corn in the following models we recommend this igniter as replacement. *For these stoves you can cut the wires to length and use your existing ceramic wire nuts for connection. ~ Castile FS & Insert ~ Santa Fe FS & Insert ~ Classic Bay 1200 FS & Insert ~ Contour ~ 1000 & 1100 models that have the upgraded cast iron burn pot Part Numbers: ~ SRV7000-462 / AMP-380W CORN Specs: ~ 380 Watts, 120V AC ~ Element: 3/4″ Wide x 4 3/8″ Length x 1/4″ Dia Rod. ~ ~ Highest Quality – Exceeds all aftermarket standards ~ 1 Year warranty from date of purchase
4. Replacement For QUADRA FIRE 1200 Pellet Stove Door Rope Gasket Kit 7/8"x8′
REPLACEMENT FOR QUADRA-FIRE DOOR GASKET KIT Fits Models: ~ Classic Bay 1200 (FS & Insert) Part Numbers: ~ MAR36 + 302R Specs: ~ 8′ length x 7/8″ Diameter Fiberglass Rope Gasket ~ 2.8 oz Tube High Temperature Silicone Adhesive ~ Highest temperature rated fiberglass gasket ~ Medium Density ~ Guaranteed correct fit ~ Made in the USA *NOTE: Remove as much of the old adhesive as possible before laying in the new adhesive and gasket.
5. Pellethead QuadraFire 380W Loop Igniter SRV7000-462
- Fits Models: * This is the factory wattage element for the following models. 380 Watt is what is required when burning Corn and other Biomass Fuels ~ Mt. Vernon A.E. Freestanding (Advanced Energy) ~ Mt. Vernon A.E. Insert (Advanced Energy) ~ Edge 60 Insert ~ Castile FS & Insert ~ Santa Fe FS & Insert ~ Classic Bay 1200 FS & Insert ~ Contour ~ Mt Vernon ~ 1000 & 1100 models that have the upgraded cast iron burn pot
- 380 Watts, 120V AC
- Highest Quality – Exceeds all OEM & Aftermarket standards
- Thermally Protected Wires- 18″ length with Male Connectors
- 1 Year Warranty through the manufacturer with our no hassle replacement guarantee
6. EZ Clean Firepot, by Quadrafire
Quadra-Fire CB1200 Firepot or Burnpot replacement. Original Quadra-Fire Parts. No Generics. Pellet Stoves. Burn Pot Assembly comes with the replacement gasket. Fits the following Quadra-Fire pellet stove models: 1200 Classic Bay 1200i Classic Bay Insert Quadra-Fire part # 812-3351 OEM Quadra-fire part. *Item will ship same day, if not next day of order. Due to it’s weight and depending on location, will ship FedEx.
7. Quadrafire Pellet Stove Control Box
Quadrafire Control Box 3-Speed – Quadrafire part # SRV7000-704 – Replaces 812-3390, 812-4410, 812-4940, 812-3392, SRV7000-205 and other control boxes. – Fits all Contour, SantaFe, CB1200 )Classic Bay 1200) and Castile – All 3 Speed (low/med/high) stoves. -Also fits Heatilator EcoChoice PS35, PS50 & CAB50 Pellet Stoves. – Inserts and Freestanding! – If you are unsure if this will fit your stove, email before purchasing. RETURNS ARE NOT ACCEPTED ON THIS ITEM.
8. Mt. Vernon AE Ignitor – 2 Pack
Mt. Vernon AE Ignitor SRV7000-647 x 2 New Ignitor for AE Models Only – Pellets Only (not for Corn or other fuels) This New Ignitor is 300 Watts Instead of the Previous Versions 380 Watt – SRV7000-462 This Will allow the ignitor to heat up less in the chamber extending life.
9. Mt. Vernon AE Pellet Stove Loop Ignitor 300 Watt SRV7000-647
This is a replacement 300 watt loop igniter element that fits ALL Quadra Fire Pellet burning stoves. We do not recommend the 300 watt igniter if you are burning bio-fuel or corn. Specifically, this igniter fits: *Mt. Vernon AE & Edge 60 PELLET BURNING ONLY, *Castile Freestanding & Fireplace Insert, *Santa Fe Freestanding & Fireplace Insert, *Countour Freestanding, *Classic Bay 1200 Freestanding & Fireplace Insert, *1000 & 1100 Models that have the upgraded Cast Iron Burn Pot. **This Replacement Element is 300W, with 18″ length connection wires and spade connectors (For all stoves other than the Mt. Vernon AE and Edge 60, you can cut the wires and use your existing ceramic wire nuts for connection when installing.)
10. Pellet Stove Igniter Replacement C-E-IGN Breckwell Igniter Ignitor Hot Rod Starter Element 4"
- [PREMIUM QUALITY] High Temperature Wire – Fiberglass insulation (Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications) over stranded Grade “A” nickel wire. (840o F / 450o C) Heat Shrink used on solder joints to prevent breaking.
- [FITMENT] The Igniter Element is used on all Breckwell models of Pellet Stoves from 1998 to present. 250 Watts, 120V AC, 4 inches long. Also fits the Austroflamm Integra & Wega.
- [REPLACE PART NUMBER] C-E-IGN Igniter. According to the manual for the Breckwell P22 Pellet stove, it calls for a C-E-IGN. This igniter work on Breckwell Big E2 sp1002.
- [SPECIAFICS] 3/8 inch diameter Anti-seize Threading Easy to install and uninstall. 120 Volts 300 Watts Provide continuous sheath temperatures up to 1,200Ã‚Â° F.
- [SERVICE GURANTEE] Package include: 1Pc x C-E-IGN Pellet Stove Igniter. If it fails on your stove, feel free to contact us any time.
Brand New and Never used Parts.
Made by Premium Quality Material.
Extremely Durable Aftermarket Part.
Easy to install and prefect replacement for original parts.
diameter: 3/8 inch diameter Anti-seize Threading
Voltage: 120 Volts 300 Watts Provide continuous sheath temperatures up to 1,200Ã‚Â° F
High Temperature Wire-Fiberglass insulation (Fiberglass woven glass strands provides good insulation for use in high temperature process heating applications)
over stranded Grade “A” nickel wire. (840o F / 450o C) Heat Shrink used on solder joints to prevent breaking.
1 Pc x C-E-IGN Pellet Stove Igniter
By our suggestions above, we hope that you can found Pellet Stove Heating Element for you.Please don’t forget to share your experience by comment in this post. Thank you!